JOHN DEERE Model 520
Pedal Tractor
To return to our home page, you must click the link above.
1. Ford Body - Right . . . . . . . . you will see casting marking of Model No. 520
2. Ford Body - Left . . . . . . . . you will see casting marking of Model No. 520
3. Steering Wheel (metal) includes bolt & nut . . 16.00 (item is unpainted)
Steering Wheel (plastic) includes bolt & nut . 12.00
4. Steering Shaft . . . . . . . . 15.00
5. Seat (metal) includes bolt & nut . . . . 30.00 (item is unpainted)
Seat (plastic) includes bolt & nut . . . . . 20.00
6. Front Post & axle . . . . . . . . . 30.00
(I would need to know if the front post has one washer or two)
7. Pedal Arm (ball bearing bushings) . . . 30.00
8. Rear Drive Rim . . (rims are powder coated JD yellow with tires mounted) 25.00
9. Rear Idle Rim . . (rims are powder coated JD yellow with tires mounted) 25.00
Rear tire (just the tire) . . . . . . . . 20.00
10. Front Wheels . . . . (plastic rims with tires mounted) 20.00
A set of all metal front and rear rims with tires mounted, including chrome hub caps & cotter pins $98.00.
If your 520 had the plastic front rimed wheels you can put the metal back on. Only thing is you will have to drill an 1/8" hole in the front axle to accommodate the cotter pin which holds the wheels on. OR if you do not want to drill the hole, I can send two push caps that will hold the wheel on and then you put the chrome hub cap over top.
11. Rear 7/8" Hub . . . . . . . . . . $15.00 (hub) (includes the bushing)
7/8" rear hub bushing . . . . . . . . . $2.50
Rear 1 1/8" Hub . . . . . . . . . . . . . $25.00 (hub)
1 -1/8" rear hub bushing . . . . . . . . $3.00
12. Pedal, black plastic . . . . . . . $2.00
13. Hat shaped push cap . . . . . . . $1.00
14. Hub Cap . . . . . . . $2.00
15. Rear Hub Bushing (see #11)
16. Rear Axle & Sprocket . . . . . . . $20.00
17. Hitch Pin Assembly . . . . . . . $4.00
18. Chain . . . . . . . $8.00
19. Mounting Hardware - Body . . . . . $7.00
Kit includes bolts & nuts for the body, plus steering wheel & seat bolts & nuts along with washers and cotter pins. Plus the Rear Hub bolts and nuts for both rear axle housings. The chain guard screws are included in this kit also.
20. Decal sets: JD 4430 . . . . . . . $15.00
JD 4440 . . . . . . . $15.00
JD 4450 . . . . . . . $15.00
21. Chain Guard . . . . . . . . $12.00 (item is unpainted)
22. Chain Connecting Link (comes with chain) Master link is $1.00, if needed. [Master link is not included in hardware kit]
23. Steering Wheel Bolt w/nut . . . . . . . .25
24. Pedal Crank hardware (comes with pedal crank)
25. Seat Bolt w/nut . . . . . . . .25
26. Hub Bolts (comes with hardware kit or the hub)
27. Chain guard screws (8) . . . . . . $.75
28. Cotter pin . . . . . . $.10 ea
29. Rear axle washer . . . $.25 ea
items 23 thru 29 [plus all the casting nuts & bolts] included in the Mounting Hardware Kit . . $7.00
*
The ERTL Company in 1990 made what is called the 4455. This pedal tractor has a casting marking saying Stock No. 520. The ERTL box seal showing on the right side. The Model 55 has the starter on the left rather than the battery box which is on the 50. It also has a large embossed ERTL seal on the casting.
*
In 1990 ERTL also made the 55 Industrial. This pedal tractor was the industrial JD Yellow in color. It is marked in much the same way as the above green JD 4455. If you want an original 55 Industrial tractor you almost have to have the original box it came in. Anyone can paint a Model 55 and call it an Industrial. Original industrials have a typical ERTL date mark like the 1/16" scale toys.
Parts plus shipping. I would not know shipping until we have an order, with name and address, then pack the box and weight it.
We accept: DISCOVER, MASTERCARD & VISA
~MONEY ORDERS ACCEPTED - NO PERSONAL CHECKS ~
When ready to order parts, please call with your card number.
Call any day 8:oo am to 9:oo pm Eastern Time.
DO NOT email your card number.